CHAPTER III

BRITISH AIRSHIPS BUILT BY PRIVATE FIRMS

It has been shown in the previous chapter that the development of the airship had been practically neglected in England prior to the twentieth century. Ballooning had been carried out both as a form of sport and also by the showman as a Saturday afternoon's sensational entertainment, with a parachute descent as the piece de resistance. The experiments in adapting the balloon into the dirigible had, however, been left to the pioneers on the Continent.

PARTRIDGE'S AIRSHIP

It appears that in the nineteenth century only one airship was constructed in this country, which proved to be capable of ascending into the air and being propelled by its own machinery. This airship made its appearance in the year 1848, and was built to the designs of a man named Partridge. Very little information is available concerning this ship. The envelope was cylindrical in shape, tapering at each end, and was composed of a light rigid framework covered with fabric. The envelope itself was covered with a light wire net, from which the car was suspended. The envelope contained a single ballonet for regulating the pressure of the gas. Planes, which in design more nearly resembled sails, were used for steering purposes. In the car, at the after end, were fitted three propellers which were driven by compressed air.

Several trips of short duration were carried out in this airship, but steering was never successfully accomplished owing to difficulties encountered with the planes, and, except in weather of the calmest description, she may be said to have been practically uncontrollable.

HUGH BELL'S AIRSHIP

In the same year, 1848, Bell's airship was constructed. The envelope of this ship was also cylindrical in shape, tapering at each end to a point, the length of which was 56 feet and the diameter 21 feet 4 inches. A keel composed of metal tubes was attached to the underside of the envelope from which the car was suspended. On either side of the car

screw propellers were fitted to be worked by hand. A rudder was attached behind the car. It was arranged that trials should be carried out in the Vauxhall Gardens in London, but these proved fruitless.

BARTON'S AIRSHIP

In the closing years of the nineteenth century appeared the forerunners of airships as they are to-day, and interest was aroused in this country by the performances of the ships designed by Santos-Dumont and Count Zeppelin. From now onwards we find various British firms turning their attention to the conquest of the air.

In 1903 Dr. Barton commenced the construction of a large non-rigid airship. The envelope was 176 feet long with a height of 43 feet and a capacity of 235,000 cubic feet; it was cylindrical in shape, tapering to a point at each end. Beneath the whole length of the cylindrical portion was suspended a bamboo framework which served as a car for the crew, and a housing for the motors supplying the motive power of the ship. This framework was suspended from the envelope by means of steel cables. Installed in the car were two 50 horse-power Buchet engines which were mounted at the forward and after ends of the framework. The propellers in themselves were of singular design, as they consisted of three pairs of blades mounted one behind the other. The were situated on each side of the car, two forward and two aft. The drive also include large friction clutches, and each engine was under separate control.

To enable the ship to be trimmed horizontally, water tanks were fitted at either end of the framework, the water being transferred from one to the other as was found necessary.

A series of planes was mounted at intervals along the framework to control the elevation of the ship.

This ship was completed in 1905 and was tried at the Alexandra Palace in the July of that year. She, unfortunately, did not come up to expectations, owing to the difficulty in controlling her, and during the trial flight she drifted away and was destroyed in landing.

WILLOWS No. 1

From the year 1905 until the outbreak of war Messrs. Willows & Co. were engaged on the construction of airships of a small type, and

considerable success attended their efforts. Each succeeding ship was an improvement on its predecessor, and flights were made which, in their day, created a considerable amount of interest.

In 1905 their first ship was completed. This was a very small non- rigid of only 12,500 cubic feet capacity. The envelope was made of Japanese silk, cylindrical in shape, with rather blunt conical ends. A long nacelle or framework, triangular in section and built up of light steel tubes, was suspended beneath the envelope by means of diagonally crossed suspensions.

A 7 horse-power Peugeot engine was fitted at the after end of the nacelle which drove a 10-feet diameter propeller. In front were a pair of swivelling tractor screws for steering the ship in the vertical and horizontal plane. No elevators or rudders were fixed to the ship.

WILLOWS No. 2

The second ship was practically a semi-rigid. The envelope was over twice the capacity of the earlier ship, being of 29,000 cubic feet capacity. This envelope was attached to a keel of bamboo and steel, from which was suspended by steel cables a small car. At the after end of the keel was mounted a small rudder for the horizontal steering. For steering in the vertical plane two propellers were mounted on each side of the car, swivelling to give an upward or downward thrust. A 30 horse-power

J.A.P. engine was fitted in this case. Several successful flights were carried out by this ship, of which the most noteworthy was from Cardiff to London.

WILLOWS No. 3

No. 2, having been rebuilt and both enlarged and improved, became known as No. 3. The capacity of the envelope, which was composed of rubber and cotton, was increased to 32,000 cubic feet, and contained two ballonets. The gross lift amounted to about half a ton. As before, a 30 horse-power J.A.P. engine was installed, driving the swivelling propellers. These propellers were two-bladed with a diameter of 61 feet. The maximum speed was supposed to be 25 miles per hour, but it is questionable if this was ever attained.

This ship flew from London to Paris, and was the first British-built

airship to fly across the Channel.

WILLOWS No. 4

The fourth ship constructed by this firm was completed in 1912, and was slightly smaller than the two preceding ships. The capacity of the envelope in this instance was reduced to 24,000 cubic feet, but was a much better shape, having a diameter of 20 feet, which was gradually tapered towards the stern. A different material was also used, varnished silk being tried as an experiment. The envelope was attached to a keel on which was mounted the engine, a 35 horse-power Anzani, driving two swivelling four-bladed propellers. From the keel was suspended a torpedo-shaped boat car in which a crew of two was accommodated. Originally a vertical fin and rudder were mounted at the stern end of the keel, but these were later replaced by fins on the stern of the envelope.

This ship was purchased by the naval authorities, and after purchase was more or less reconstructed, but carried out little flying. At the outbreak of war she was lying deflated in the shed at Farnborough. As will be seen later, this was the envelope which was rigged to the original experimental S.S. airship in the early days of 1915, and is for this reason, if for no other, particularly interesting.

WILLOWS No. 5

This ship was of similar design, but of greater capacity. The envelope, which was composed of rubber-proofed fabric, gave a volume of 50,000 cubic feet, and contained two ballonets. A 60 horsepower engine drove two swivelling propellers at an estimated speed of 38 miles per hour. She was constructed at Hendon, from where she made several short trips.

MARSHALL FOX'S AIRSHIP

In the early days of the war an airship was constructed by Mr. Marshall Fox which is worthy of mention, although it never flew. It was claimed that this ship was a rigid airship, although from its construction it could only be looked upon as a non-rigid ship, having a wooden net-work around its envelope. The hull was composed of wooden transverse frames forming a polygon of sixteen sides, with radial wiring fitted to each transverse frame. The longitudinal members were spiral in form and

were built up of three-ply lathes. A keel of similar construction ran along the under side of the hull which carried the control position and compartments for two Green engines, one of 40 horse-power, the other of 80 horse-power, together with the petrol, bombs, etc.

In the hull were fitted fourteen gasbags giving a total capacity of 100,000 cubic feet. The propeller drive was obtained by means of a wire rope. The gross lift of the ship was 4,276 lb., and the weight of the structure, complete with engines, exceeded this.

It became apparent that the ship could never fly, and work was suspended. She was afterwards used for carrying out certain experiments and at a later date was broken up.

Apart from the various airships built under contract for the Government there do not appear to be any other ships built by private firms which were completed and actually flew. It is impossible to view this lack of enterprise with any other feelings than those of regret, and it was entirely due to this want of foresight that Great Britain entered upon the World War worse equipped, as regards airships, than the Central Empires or any of the greater Allied Powers.